Cypress ISR 37000 CPLD User Manual download pdf (Page 8)

Ultra37000 CPLD Family

Document #: 38-03007 Rev. *E Page 8 of 64

The third programming option for Ultra37000 devices is to

utilize the embedded controller or processor that already

exists in the system. The Ultra37000 ISR software assists in

this method by converting the device JEDEC maps into the

ISR serial stream that contains the ISR instruction information

and the addresses and data of locations to be programmed.

The embedded controller then simply directs this ISR stream

to the chain of Ultra37000 devices to complete the desired

reconfiguring or diagnostic operations. Contact your local

sales office for information on availability of this option.

The fourth method for programming Ultra37000 devices is to

use the same programmer that is currently being used to

program F

LASH370i devices.

For all pinout, electrical, and timing requirements, refer to

device data sheets. For ISR cable and software specifications,

refer to the UltraISR kit data sheet (CY3700i).

Third-Party Programmers

As with development software, Cypress support is available on

a wide variety of third-party programmers. All major third-party

programmers (including BP Micro, Data I/O, and SMS) support

the Ultra37000 family.

[+] Feedback

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

No comments

Cypress ISR 37000 CPLD User Manual Page 8