Cypress PCHD-DVI-SCALER Specifications download pdf (Page 15)

DRAFT

Note (PC): Available only when PC is selected as input.

To adjust picture quality, Use "+,-" to move the highlight bar to your

desired adjust item, press the Menu/Enter to conrm your selection.

At this point, the selected parameter will turn red, you can then use +,-

to increase or decrease the value of the parameter.

When adjustment is complete, press "Menu" to leave the parameter.

Move the highlight bar to "Exit", then press Menu/Enter to exit.

Note: The "H-position" and "V-position" are only available when

component or PC input is selected. Neither are available when the

DVI input is selected.

Picture mode-there are 4 picture modes for customer to choose from.

User: Select to adjust to your favorite setting and store it.

Standard: Standard factory default setting for optimal display in a

normal environment.

Vivid: High saturation picture for optimal display in a bright room.

Movie: Picture for comfortable low brightness display in a dark room.

Scale: select overscan when input source is SD or HD video to ensure

no black band around screen border. Select underscan when input

source is PC signal to ensure full picture content fall within screen

border.

Noise Reduction: This function only works when input is analog RGB or

component. It will not work for DVI input. There are four steps of

Noise Reduction-Off, Low, Middle High. The Noise Reduction will

remove the noise that results from analog to digital convertion

and digital scaling processing.

H & V position: To adjust for best horizotal and vertical position of the

picture in the screen.9. Specications

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

No comments

Cypress PCHD-DVI-SCALER Specifications Page 15