Cypress PCHD-DVI-SCALER Specifications download pdf (Page 8)

DRAFT

4. OPERATION CONTROLS AND FUNCTIONS

4.1 Front Panel

Y/HD

Cb/Pb

Cr/Pr

PC DVI

MENU POWERINPUT

ENTER

INPUT

AUTO

ADJUST

3 54 61 2

Component Input: Connects this input connector to the

Component output connector of your source equipment using the

enclosed 3RCA to 3RCA cable.

The CP-255DN accepts both interlaced component input

(480i, 576i) and deinterlaced progressive input (480p, 576p...1080p).

The input range is 480i, 570i~1080i, 1080p.

IR Sensor: Infrad remote control sensor.

Input LED Indicators: When one of the LED illuminates its

corresponding source is being selected as input.

Menu/Enter: This button serves two purposes.

a. Press the button to bring up OSD main menu as shown in the

"OSD Operation". (page 9)

b. To act as a "Enter" key to enter sub menu or to adjust setting

value of the selected parameter.

+/- button: The buttons provide 3 functions:

a. Input select ("+"): Press the "+" button repeatedly to select your

desired input source. The input sources are toggled through in the

following sequence.

YPbPr (YCbCr) PC DVI

b. Auto Tune ("-"): Press the "-" button to carry out picture auto

adjust for analog inputs (component or PC). The CP-255DN will ne

tune the position (centering) and color of the output picture.

c. When in the OSD menu mode: Press the +, - button to move up

or down the highlight bar to your desired parameter. Or once a

parameter is selected with MENU/Enter button, press the button to

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Cypress PCHD-DVI-SCALER Specifications Page 8