Cypress PCHD-DVI-SCALER Specifications download pdf (Page 9)

DRAFT

adjust setting value of your selected parameter.

Power: Press the button to turn ON or turn OFF (standby) the power

of the unit.

4.2 Rear Panel

PC OUTDVI OUT PC INDVI IN

DC 5V

1 2 3 4 5

Power jack: Connect to the 5V 2.6A DC power adaptor.

DVI output: Scaled digital DVI output. Connect this output to the

DVI input or HDMI input of your Digital display.

Note: When input is a HDCP encrypted DVI signal the DVI output is

also HDCP

encrypted. The monitor/display that connected to this output

also need to be HDCP compliant in order to get a nice and clean

picture. A non-HDCP compliant display can only display non-

HDCP signal and picture will become noise when input is a HDCP-

encrypted signal.

PC-D sub out: The connector for scaled analog RGB output.

Connect this output port to the analog PC RGB input of your

monitor, or connect it to the RGBHV input of your HD display using

D-sub to 5 BNC adaptor cable. (not included in the package)

Note: When input is a HDCP encrypted DVI signal this analog

output will be turned off.

DVI input: Connects this DVI input connector to the DVI output

connector of your DVI source equipment. The DVI input should be

digital DVI only and should not include analog RGB signal.

The use of DVI-I connector is to ensure both DVI-I and DVI-D male

connector of the DVI cable can t into this input connector.

The digital DVI input resloution can range from 480i~1080p, or

VGA~WUXGA.

PC input: Connects this PC input connector to the VGA output of

your PC. The acceptable PC resolutions range from VGA~WUXGA.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Cypress PCHD-DVI-SCALER Specifications Page 9