Cypress NoBL CY7C1371D User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 29
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
CY7C1371D
CY7C1373D
Document #: 38-05556 Rev. *F Page 29 of 29
Document History Page
Document Title: CY7C1371D/CY7C1373D 18-Mbit (512K x 36/1 Mbit x 18) flow through SRAM with NoBL™ Architecture
Document Number: 38-05556
REV. ECN NO.
Issue
Date
Orig. of
Change Description of Change
** 254513 See ECN RKF New data sheet
*A 288531 See ECN SYT Edited description under “IEEE 1149.1 Serial Boundary Scan (JTAG)” for
non-compliance with 1149.1
Removed 117 Mhz Speed Bin
Added Pb-free information for 100-Pin TQFP, 119 BGA and 165 FBGA Packages
Added comment of ‘Pb-free BG packages availability’ below the Ordering Infor-
mation
*B 326078 See ECN PCI Address expansion pins/balls in the pinouts for all packages are modified
according to JEDEC standard
Added description on EXTEST Output Bus Tri-State
Changed description on the Tap Instruction Set Overview and Extest
Changed Θ
JA
and Θ
JC
for TQFP Package
from 31 and 6 °C/W to 28.66 and 4.08
°C/W respectively
Changed Θ
JA
and Θ
JC
for BGA Package
from 45 and 7 °C/W to 23.8 and 6.2 °C/W
respectively
Changed Θ
JA
and Θ
JC
for FBGA Package
from 46 and 3 °C/W to 20.7 and 4.0
°C/W respectively
Modified V
OL,
V
OH
test conditions
Removed comment of ‘Pb-free BG packages availability’ below the Ordering Infor-
mation
Updated Ordering Information Table
*C 345117 See ECN PCI Updated Ordering Information Table
Changed from Preliminary to Final
*D 416321 See ECN NXR Changed address of Cypress Semiconductor Corporation on Page# 1 from “3901
North First Street” to “198 Champion Court”
In the Partial Truth Table for Read/Write on page # 10, the BW
A
of Write Byte A –
(DQ
A
and
DQP
A
) and BW
B
of Write Byte B – (DQ
B
and
DQP
B
) has been changed
from H to L
Changed the description of I
X
from Input Load Current to Input Leakage Current
on page# 20
Changed the Ix current values of MODE on page # 20 from -5 µA and 30 µA
to -30 µA and 5 µA
Changed the Ix current values of ZZ on page # 20 from -30 µA and 5 µA
to -5 µA and 30 µA
Changed V
IH
< V
DD
to V
IH
< V
DD
on page # 20
Replaced Package Name column with Package Diagram in the Ordering
Information table
Updated Ordering Information Table
*E 475677 See ECN VKN Added the Maximum Rating for Supply Voltage on V
DDQ
Relative to GND
Changed t
TH
, t
TL
from 25 ns to 20 ns and t
TDOV
from 5 ns to 10 ns in TAP AC
Switching Characteristics table.
Updated the Ordering Information table.
*F 1274734 See ECN VKN/AESA Corrected typo in the “NOP, STALL and DESELECT Cycles” waveform
[+] Feedback
Page view 28
1 2 ... 24 25 26 27 28 29

Comments to this Manuals

No comments