Cypress PCHD-DVI-SCALER Specifications download pdf (Page 12)

DRAFT

The CP-255DN accepts component, PC and DVI inputs. The formats

supported by these inputs are as follows:

• When connecting to a PC source use a 15-pin D-sub cable to

connect the

• output of a PC to the D-Sub input connector of the CP-255DN.

• When connecting to a component source (either SD or HD

resolution) use a

• 3RCA to 3RCA cable to connect the YPbPr or YCbCr output of a

DVD or Set Top Box to the Y-Cb/Pb-Cr/Pr input connecter of the

CP-255DN.

• When connecting to a DVI source, use a DVI-I or DVI-D cable to

connect the

• DVI output of a PC or DVD to the DVI input connector of the CP-

255DN.

• When connecting to a HDMI source, use a HDMI cable to connect

to the HDMI output of a HDMI source, such as DVD or STB, on the

one end.

And use a HDMI to DVI connector adaptor to connect to the other

end of the HDMI cable. The DVI connector of the adaptor is then

connect to the DVI input of the CP-255DN.

The CP-255DN can automatically detect the input resolution of all

three inputs. To switch from one input source to another just press the

input button on the front panel ("+") or on the remote control.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Cypress PCHD-DVI-SCALER Specifications Page 12